Klimber 3 P
COMPETITION
CROSS COUNTRY
HIKE & FLYCOMPETITIONCROSS COUNTRYHIKE & FLYWe present the third generation of the Klimber. We keep improving our P Series two-liner: super compact, ultra-light and high performance. We put all our knowledge, technologies and experience at the service of pilots who want to achieve the best results in hike & fly and cross-country paragliding. With a competitive character, it has been designed for the X-Alps.
From 2.85 kg.
XC and hike & fly
The Klimber 3 P is the perfect partner for mountain lovers. Ideal for experienced pilots looking to reach higher peaks and cover long distances with an ultralight glider.
Hike & fly competitions
A high performance machine, perfect for complicated launches and landings. The wing stays solid and efficient, even in turbulent air. It is our P Series racing model par excellence.
Vol-biv
Go big distances with a paraglider that has evolved in terms of glide and thermal performance. The use of Nitinol allows a more compact and practical packing for those multi-day adventures.
3DL technology is an adjustment of the fabric at the leading edge of the wing to control the ballooning and the creases that are generated by the curvature in this area. The leading edge is then divided into sub-panels which are sewn into each of the cells at the front of the paraglider. As a result, the leading edge of the wing is perfectly tensioned, which benefits the wing in performance and durability.
A good comparison is a rugby ball. In order to produce its characteristic oval shape without creases, its cover is made of several panels – not of just one piece.
The application of this innovation, in conjunction with the 3DP, is key to converting the perfect shape from 2D to 3D.
The RAM Air Intake system is based on the inward orientation of the air inlets in the profile so that they allow an optimum internal pressure at all angles of attack.
The result? Having greater internal pressure means better buffering of turbulence, greater consistency of the profile shape across the speed range. Excellent handling at low speed is achieved by allowing the pilot to extend the braking limit, so there is a lower risk of collapse and consequently, greater control and stability.
RSD (Radial Sliced Diagonal) technology is a reinvention of the wing’s internal structure. It incorporates independent and efficiently oriented diagonal ribs, which follow the direction of the cloth. This improves the strength, reduces weight and minimises deformation.
These days, in order to improve stress distribution and reduce the number of attachment points and lines, most wings have these diagonal ribs, which are connected from the attachment points to the adjacent profiles.
In conventional diagonal ribs, loading and unloading cycles away from the highest strength axis of the cloth result in a loss of shape, which reduces the cohesion of the wing and therefore aerodynamic efficiency.
This technology seeks to implement the best orientation of the cloth on each panel according to its location on the leading edge. If the cloth pattern is correctly aligned with the load axes, the cloth suffers less deformation flight after flight, so the leading edge maintains its shape better and remains stronger over time.
The design of our paraglider and paramotor wings has evolved a lot over the years, with a positive and specific focus on the leading edge.
Thanks to this technology and 3DL, a perfect modelling of the panels and an exact representation from 2D to 3D is achieved.
The IKS (Interlock System) is a system to connect the risers with different parts of the wing, such as the lines, the harness or the parachute. This technology stands out for its innovation in lightness, optimising both the glider and the equipment in general, without compromising efficiency or the level of safety.
Niviuk has developed three variants: the IKS 1000, the Easy IKS 2500 and the IKS 3000, each intended to connect different parts of the paraglider.
✓ IKS 1000: risers to lines
The IKS 1000 is designed to connect risers to the lines. It can carry up to 1055 kg, which is far more than the 550 kg of the classic 3 mm maillons, but weighs much less. This makes it an essential part of our entire range of P Series (plume/light) wings, which already come with this technology as standard.
✓ Easy IKS 2500: risers to harness
The Easy IKS 2500 is a lightweight attachment system designed to connect the risers to the harness. It can carry up to 2673 kg and is made of Dyneema, making it very strong and durable. It is the perfect ultra-lightweight alternative to the twist-lock aluminium carabiner (with a maximum load of 2000 kg). The design and application of this connector makes it ideal for mountain harnesses and wings, and light flying gear.
Watch here the video tutorial with the user manual to learn how to use the Easy IKS 2500.
Download the Easy IKS 2500 certification report here.
✓ IKS 3000: parachute to harness
Finally, the IKS 3000 is used to connect the parachute to the harness. It can also be used to connect the risers to the harness, as an alternative to the Easy IKS 2500. It can carry up to 2960 kg, making it an ultra-light alternative to the 7 mm maillon (which can carry 3125 kg) or the twist-lock aluminium carabiner (with a maximum load of 2000 kg). The design and application of this connector is ideal for mountain wings and lightweight equipment.
Nitinol is a combination of 50% nickel and 50% titanium. The incorporation of Nitinol rods in the profile increases the performance of the wing, especially in three areas:
- Compared to nylon rods, the weight of the wing is reduced by 13%.
- Nitinol has two essential characteristics: shape memory and enormous elasticity. As a result, the rods retain their optimum shape even after an ultra-compact or incorrect folding, so that the wing is not deformed. This will always be the case unless the radius at the point of curvature is less than 1 cm.
- The leading edge shape is much more rigid and uniform which results in a much more consistent and progressive inflation and therefore an easier take off. The profile is taut at all times, without creases, and fully optimised for all flight phases.
In addition, the rods have a plastic protector at their ends to prevent any damage to the fabric of the wing.
Nitinol is now featured in all our wings.
The application of mini-ribs on the trailing edge reduces drag and improves the aerodynamic shape of the wing. The DRS technology has been optimised: The mini ribs are integrated directly into the cut of the outer panels with the result that the outer seams disappear.
A new fabric, Dokdo 25 g/m2, has been used on the outside of the wing to make it lighter. Skytex 27gr has been used throughout the internal structure to ensure strength and lightness. A new waterproof coating (Edelrid Magic Pro Dry) has been used on the lines to make pre-flight preparation simpler.
Based on Niviuk TNT technology, the Nitinol rods have been redistributed to achieve a much more stable wing in all phases of flight. Thus, the shape of the wing is maintained under all circumstances, even after very compact folding and packing.
We have applied the knowledge acquired in the development of the Peak 6 to build a new aerodynamic profile and to improve the manufacturing process. This has resulted in a more stable and higher performing wing.
A complex reinforcement system in the internal structure allows maximum strength using the minimum possible material. RSD technology improves load distribution on the diagonals, benefiting the wing in terms of weight and reducing the risk of deformation over time.
Roll movements stabilized, especially when accelerated, which significantly improves flight comfort.
New risers incorporating a new, smaller and lighter Ergo handle, specially designed for this P Series wing. This allows the pilot more comfortable and efficient control thanks to direct steering on the B-risers.
A locking system eases the use of the speed-bar and reduces the amount of travel the pilot has to push to reach full bar.
| 20 | 21 | 23 | |||
|---|---|---|---|---|---|
| CELLS | NUMBER | 64 | 64 | 64 | |
| ASPECT RATIO | FLAT | 6,95 | 6,95 | 6,95 | |
| PROJECTED | 5,32 | 5,32 | 5,32 | ||
| AREA | FLAT | m² | 20,3 | 21,5 | 23,0 |
| PROJECTED | m² | 17,3 | 18,3 | 19,6 | |
| SPAN | FLAT | m | 11,88 | 12,22 | 12,64 |
| CHORD | MAXIMUM | m | 2,15 | 2,22 | 2,29 |
| LINES | TOTAL | m | 199 | 205 | 212 |
| MAIN | 2-2/3 | 2-2/3 | 2-2/3 | ||
| RISERS | NUMBER | A-A’/B | A-A’/B | A-A’/B | |
| SPEED-BAR | mm | 190 | 200 | 200 | |
| GLIDER WEIGHT | kg | 2,85 | 2,95 | 3,10 | |
| TOTAL WEIGHT IN FLIGHT | MIN-MAX | kg | 60-78 | 73-93 | 85-105 |
| OPT. WEIGHT IN FLIGHT | MIN-MAX | kg | 68-73 | 84-90 | 95-100 |
| CERTIFICATION |
EN/LTF D
|
EN/LTF D
|
EN/LTF D
|
The total weight of the wing may differ ±2% due to variations in the weight of the fabric supplied by the manufacturers.
Klimber 3 P
It contains an 8-digit code that, when entered in the MyNiviuk section, can be used for product registration, to carry out procedures and request maintenance.
